overspeed no rpm sense

Having a problem with the forum? Please post it here.
Post Reply
David Sutherland
New Member
New Member
Posts: 1
Joined: Fri Oct 11, 2019 1:34 pm

Fri Oct 11, 2019 1:40 pm

have a generac house generator and it just stopped working during power outage. the red led is flashing the overspeed no rpm sense...
any help would be awesome. also is there a way to find generac technicians in my area? thank you.
59250754379__C0F021DD-B9B4-49F3-82D8-F81561C8A340.jpeg
59250754379__C0F021DD-B9B4-49F3-82D8-F81561C8A340.jpeg (166.23 KiB) Viewed 13 times
Chris
Site Admin
Site Admin
Posts: 791
Joined: Sat Aug 04, 2018 8:46 pm
Location: Clawson, MI
Contact:

Fri Oct 11, 2019 2:03 pm

This could mean a few things.

The RPM loss alarm could mean that the unit stalled because it ran out of fuel, was overloaded, or has some other issue with the engine or fuel system. Is this unit on propane or natural gas?

If you're in Michigan, I can help, otherwise you can use Generac's dealer locator found here: http://www.generac.com/dealer-locator.aspx
Generac tech for over 12 years. I'm here to help!
"The only source of knowledge is experience" -Albert Einstein
Looking for Generac parts? Gentek Power offers the full line of Generac replacement parts! Shop Gentek Power Generac Parts
A list of my favorite Generator & Electrical Tools! https://www.amazon.com/shop/gentek_power
Post Reply