RDC2 controller unresponsive

Kohler Home Standby & Commercial generator troubleshooting and repair questions
Post Reply
kamber
New Member
New Member
Posts: 2
Joined: Tue Feb 11, 2020 3:42 pm

Hi Guys,

Thanks for letting me join.

Hi from England. I
have a problem with the RDC 2 controller on a Kohler (SDMO in Europe) RESA14TEC . The red LED above the off button and yellow led above the run button are flashing. The controller does not repond to anything at all. I have disconnected it for a while and it is still ther same. The battery is good.

Any ideas?

Thanks

Paul
lvggeneratorllc
New Member
New Member
Posts: 2
Joined: Thu Jan 07, 2021 8:23 pm

Can you connect to site tech? If you can, attempt to up-date the latest and greatest firmware, but if not, then its probably a controller
Generator tech since 2011
Post Reply