Upgrade from 5951 RF monitor to Mobil Link 4g

Generac, Guardian, Honeywell, Siemens, Centurion, Watchdog, Bryant, Olympian & Carrier Liquid Cooled Home Standby & Commercial generator troubleshooting and repair questions
Post Reply
jory usa
New Member
New Member
Posts: 1
Joined: Fri Sep 17, 2021 5:31 pm

I have a 36 kw, 240v, 1 PH, LPG water cooled Generac system activated 12/2011. Serial #6672208. I have the RF remote that intermittently loses connection. If I want to upgrade to the Mobile Link 4G, which parts do I need? It has never had the 3g version so I assume I need to do a "new" install 7169 with a 6478 harness to reach the battery. Thanks.
Site Admin
Site Admin
Posts: 4667
Joined: Sat Aug 04, 2018 8:46 pm
Location: Clawson, MI

You would want the 7202 Mobile Link kit and the extension harness 6478. The 7169 is a complete kit for Air Cooled units, however you're paying extra for a harness you'll throw out. The 7202 is just the Mobile Link which was designed for units that already have a 3G one and harness. The only thing you'll be missing is the little PVC 3/4" male adapter, which can be had at any hardware store for about $.50

Mobile Link Liquid Cooled Extension Harness https://shop.gentekpower.com/products/g ... generators

Mobile Link 4G 7202 https://shop.gentekpower.com/products/g ... generators
Generac tech for over 12 years. I'm here to help!
"The only source of knowledge is experience" -Albert Einstein
Looking for Generac parts? Gentek Power offers the full line of Generac replacement parts! Shop Gentek Power Generac Parts
A list of my favorite Generator & Electrical Tools! https://www.amazon.com/shop/gentek_power
Post Reply