Registration/New Topic loop for new users. Clear your cache!

Having a problem with the forum? Please post it here.
Locked
Chris
Site Admin
Site Admin
Posts: 7025
Joined: Sat Aug 04, 2018 8:46 pm
Location: Clawson, MI
Contact:

It was brought to my attention today that a few new users were getting a strange registration loop when they tried to sign up to the site. Basically, if they clicked the Register button, it just went back to the Index page. We've nailed this down to a network glitch that was saved in your browser cache files. All you have to do is clear your browser cache and the issue should correct. If not, PLEASE use the contact us page here and let me know!

Update 5/10/21:
Some users are also reporting that certain forums are not allowing a new topic to be created while others are. If you're experiencing this, please let us know! In most cases clearing your cache and cookies seems to be working. We are working with out hosting provider to get this nailed down! This glitch seems to have come after a network 'upgrade' on their end which they are having a hard time tracking down.


Thanks!!
Generac tech for over 12 years. I'm here to help!
"The only source of knowledge is experience" -Albert Einstein
Looking for Generac parts? Gentek Power offers the full line of Generac replacement parts! Shop Gentek Power Generac Parts
A list of my favorite Generator & Electrical Tools! https://www.amazon.com/shop/gentek_power
BobM
New Member
New Member
Posts: 2
Joined: Wed Jun 02, 2021 6:40 pm

Hi,
I have a Generac
Generator model 005243
Serial 2544728
The unit stopped running and I then replaced the battery and a week later the unit stopped running again. I replaced the fuse and it still
Did not run. I then was thinking it was a bad battery charger and ask a generator repair company to come out and look at. The said it was the battery charger. Also he recommend changing out the voltage regulator because he said that can go bad when you install a new battery charger.I was wondering if that is normally the case that it’s recommended to replace both parts at the same time.
Thanks,
Bob
Chris
Site Admin
Site Admin
Posts: 7025
Joined: Sat Aug 04, 2018 8:46 pm
Location: Clawson, MI
Contact:

BobM wrote:
Wed Jun 02, 2021 7:11 pm
Hi,
I have a Generac
Generator model 005243
Serial 2544728
The unit stopped running and I then replaced the battery and a week later the unit stopped running again. I replaced the fuse and it still
Did not run. I then was thinking it was a bad battery charger and ask a generator repair company to come out and look at. The said it was the battery charger. Also he recommend changing out the voltage regulator because he said that can go bad when you install a new battery charger.I was wondering if that is normally the case that it’s recommended to replace both parts at the same time.
Thanks,
Bob
Hi Bob,

Can you start a new topic for me in the Generac Air Cooled section?

This will make it much easier to help you out and track the posts. I also think your serial number is incorrect.

Thanks!!
Generac tech for over 12 years. I'm here to help!
"The only source of knowledge is experience" -Albert Einstein
Looking for Generac parts? Gentek Power offers the full line of Generac replacement parts! Shop Gentek Power Generac Parts
A list of my favorite Generator & Electrical Tools! https://www.amazon.com/shop/gentek_power
Locked