you need to buy one of these for your AC

Install help and sizing for Hyper Engineering Sure Start AC Soft Starters.
Generator Guru
Generator Guru
Posts: 387
Joined: Tue Sep 15, 2020 8:42 am

Thanks I really wanted to have confidence it the device. I’m going to reinvestigate the problem. I made sure it was rated correctly. Have a 4 ton compressor on my bench. Works fine when I bench tested it. The unit ran for a few days with the soft start. I amped it out and had good amperage. Had to be hooked up right. I going to hook it up on my house unit. Think that’s the best way to test it. Also double check the rating.
Birken Vogt
Generator Jedi Master
Generator Jedi Master
Posts: 1063
Joined: Sun Nov 11, 2018 12:02 am

I learned in class when talking to the Europeans. "Good" readings are not good enough for them.

What exactly was the amperage? How did you measure it? What was it before?

I too have had great success with these units. They make a hard-starting engine-bogging electric motor turn into a load that seems like just a heating element came on.
Post Reply