Honda EM3500sx

Any other brand generator not covered in the main boards. Champion, Katolight, CAT, Baldor, Winco, etc.
Post Reply
Sjm1027
New Member
New Member
Posts: 1
Joined: Sat Jan 09, 2021 9:42 am

I am trying to remove the carburetor to clean it and can’t for the life of me figure out how to remove a linkage at the very top before I slide out the carb. I have the very small spring next to the thicker rod off but the rod is my problem.
Chris
Site Admin
Site Admin
Posts: 3938
Joined: Sat Aug 04, 2018 8:46 pm
Location: Clawson, MI
Contact:

Can you post a picture of what you have going on? Honda generators aren't my specialty, but most carbs have the same styles of linkage.
Generac tech for over 12 years. I'm here to help!
"The only source of knowledge is experience" -Albert Einstein
Looking for Generac parts? Gentek Power offers the full line of Generac replacement parts! Shop Gentek Power Generac Parts
A list of my favorite Generator & Electrical Tools! https://www.amazon.com/shop/gentek_power
Birken Vogt
Generator Guru
Generator Guru
Posts: 382
Joined: Sun Nov 11, 2018 12:02 am

If I recall correctly you slide the carb off the studs with the linkage still connected and then tip it to get it past the zigzag part.
Post Reply