Generac 6500 no idle down control

Portable standby generator troubleshooting and repair questions. (Gasoline, diesel, propane, natural gas)
johnyscore
New Member
New Member
Posts: 8
Joined: Sun Sep 15, 2019 1:31 pm

Wed Sep 18, 2019 8:32 am

I'll keep you posted. Waiting for the FETS to arrive... Thanx Again !!!
johnyscore
New Member
New Member
Posts: 8
Joined: Sun Sep 15, 2019 1:31 pm

Tue Oct 01, 2019 2:16 pm

Bassman, Finally got Q3. soldered it in, and it worked for a short time. Back to non working state. Removed Q3 and put another in it's place, and re tried it. No luck... I told my customer you can rework the board for around $90. Send me info to get it to you. Pay Pal?

Mike :angry:
johnyscore
New Member
New Member
Posts: 8
Joined: Sun Sep 15, 2019 1:31 pm

Tue Oct 01, 2019 2:18 pm

Bassman, Or should I try putting a new Q4 in first?

Mike
Bassguitarist1985
New Member
New Member
Posts: 10
Joined: Wed Jan 23, 2019 12:37 am

Tue Oct 01, 2019 3:37 pm

johnyscore wrote:
Tue Oct 01, 2019 2:16 pm
Bassman, Finally got Q3. soldered it in, and it worked for a short time. Back to non working state. Removed Q3 and put another in it's place, and re tried it. No luck... I told my customer you can rework the board for around $90. Send me info to get it to you. Pay Pal?

Mike :angry:
John,

Changing Q4 does not effect the auto idle. Ill send you my info via pm.
johnyscore
New Member
New Member
Posts: 8
Joined: Sun Sep 15, 2019 1:31 pm

Tue Oct 01, 2019 5:39 pm

Ok..
Bassguitarist1985
New Member
New Member
Posts: 10
Joined: Wed Jan 23, 2019 12:37 am

Tue Oct 01, 2019 9:42 pm

PM sent. Sorry thought it went through earlier but didn't. Didnt have a subject. Doh!
Post Reply