Manual transfer switch 6853 orange wire not connected.

Automatic/Manual transfer switch repair, wiring & troubleshooting questions
Post Reply
Bill Jr
New Member
New Member
Posts: 2
Joined: Mon Jan 04, 2021 12:16 am

I recently installed a Generac 6853 manual transfer switch and there is a orange wire that was not connected to anything. The transfer switch seems to operate properly but I would like to find out if this orange wire is supposed to be hooked up or if it is for a different application. There are 2 orange wires that come off the back of the transfer coil / solenoid. One of them goes to a micro switch and the other one is just left hanging there.

Model# 0068531
Serial # 3006692073
A2D44248-6CA4-49D8-B0BF-A0A7732319B1.jpeg (175.6 KiB) Viewed 47 times
Post Reply