Search found 4153 matches

by Chris
Sat Jun 19, 2021 11:24 am
Forum: Generac Air Cooled
Topic: 20kw voltage regulator
Replies: 4
Views: 78

Re: 20kw voltage regulator

No, the stator is a complete part. The brushes however are replaceable and are on the rear of it. Takes about an hour.
by Chris
Fri Jun 18, 2021 4:50 pm
Forum: Kohler Air Cooled/Liquid Cooled
Topic: 20 RESC cranks no start
Replies: 3
Views: 25

Re: 20 RESC cranks no start

I'm not a super savvy Kohler person, but I would say that if you think it doesn't have spark, I'd call the warranty dealer back and have them look at it. I believe these use magnetos just like the Generac units and Briggs as well. I also usually recommend people use a proper spark tester, preferably...
by Chris
Fri Jun 18, 2021 4:43 pm
Forum: Generac Air Cooled
Topic: 7077 starts - but fails to switch from supply
Replies: 3
Views: 23

Re: 7077 starts - but fails to switch from supply

Do you have some pictures of the completed wiring?

It sounds to me like the 23 wire isn't connected properly. I also can't see a T1 wire connected to the generator for the charger? Where did you connect the T1 wire to? It SHOULD NOT connected to the T1 terminal on the contactor assembly!
by Chris
Thu Jun 17, 2021 5:22 pm
Forum: Generac Air Cooled
Topic: bypass dead controller panel
Replies: 7
Views: 73

Re: bypass dead controller panel

Hopefully they will just warranty the part and you'll be on your way! If not, I would ask them up front what the charge will be for the controller. At least you'll be able to make that choice. I can tell you that if it was insect damage, they won't cover it :sad:
by Chris
Thu Jun 17, 2021 9:18 am
Forum: Generac Air Cooled
Topic: Mobile link and firmware updates
Replies: 6
Views: 2762

Re: Mobile link and firmware updates

VelvetFoot wrote:
Thu Jun 17, 2021 9:06 am
How about this?
I just got a new 70433 installed.
Mobile Link reports a firmware version of 1.11.138.
Is that current?
Yes, that's what all of mine are on.
by Chris
Thu Jun 17, 2021 8:53 am
Forum: Generac Air Cooled
Topic: Mobile link and firmware updates
Replies: 6
Views: 2762

Re: Mobile link and firmware updates

Neilhingle wrote:
Thu Jun 17, 2021 7:21 am
Hi guys. I’m in a very similar situation, except I’m in the Bahamas. Any pointers on where I can download the firmware update?
What's going on with your generator that it needs a firmware update?
by Chris
Thu Jun 17, 2021 8:47 am
Forum: Generac Air Cooled
Topic: bypass dead controller panel
Replies: 7
Views: 73

Re: bypass dead controller panel

Did you order it from us? Most of our controllers are in stock and get there in just a couple of days...
by Chris
Thu Jun 17, 2021 8:46 am
Forum: Generac Air Cooled
Topic: 10k breather gasket replacment.
Replies: 20
Views: 211

Re: 10k breather gasket replacment.

Let me find out what's going on with the order. We shipped it directly from Generac since we didn't have the breather hose here in stock. I didn't realize that it hadn't shipped out yet :sad: Edit: Looks like they're showing a ship date of between tomorrow and the 23rd. They must have ha to warehous...
by Chris
Wed Jun 16, 2021 3:44 pm
Forum: Transfer Switches
Topic: Generac 9kW Guardian's ATS won't auto transfer back and forth.?
Replies: 1
Views: 29

Re: Generac 9kW Guardian's ATS won't auto transfer back and forth.?

You need a licensed electrician and a Generac dealer to come out and assess that TERRIBLE install before you go any further! :shocked: They're using low voltage Cat5e or something very similar for the high voltage sensing and battery charging, which is eventually going to fail or possibly start a fi...
by Chris
Wed Jun 16, 2021 3:40 pm
Forum: Generac Air Cooled
Topic: Flashing Red Lights and Clicking
Replies: 15
Views: 8287

Re: Flashing Red Lights and Clicking

I would almost guarantee that the AC isn't connected to that unit. It's only 6kW on natural gas and 7kW on LP gas. Not big enough to run the AC system unfortunately :sad: